First Daughter 2: So We Meet Again Chapter 1: Trailer, a high school musical fanfic | FanFiction
- Class II Draw-Tite Trailer Hitch on Nissan Rogue . We've installed it, we've wired it and we've towed with it, so whatever your . I did it for about $ the products are well made and meet all industry .. This is the second hitch we have purchased from etrailer having passed the first one on to our daughter. You'll need the following ingredients to make this trailer: Parts 4 x 10' 1/2" electrical conduit wheel (16" or 20" -- I used a 20" tire off my daughter's old bike )** The first thing I did was strip the old frame of parts that I needed for the trailer. . would meet the bottom frame) and then used the grinder to taper the ends (again. Page 2 business from a one truck operation to now 33 with 80 trailers and over people,” stated Jon. equipment so we have complete control over its use and built for our needs with a world first in design, as the axle spacings are . BPW running gear, a brand which we decided to go for as far back as.
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - /4" Draw-Tite Trailer Hitch
Really helped out with an issue that I had, and made buying from the UK very easy. Website was very easy to navigate through for selecting the correct axle for my bike and trailer. Installation was very easy and the product is very well made. This axel is so awesome! We were able to haul our kids up a snowy road and hike into some Hot Pots in the Winter… blew our minds how this simple tool made it all possible to do such a grand trip with our kiddos in tow.
Rated 5 out of 5 Le Corse verified owner — March 6, Great product fitting perfectly my Stumpjumper, I received it faster than expected. I will highly recommend this product.
12mm Thru Axle for Kid Trailer
Rated 5 out of 5 David Sweeting — March 9, Very happy- fits my stumpjumper and just works. Happy with the entire buying experience and really thankful that the RAP is out there making these axles so that I can keep using my trailer with my new bike. Rated 5 out of 5 Drew verified owner — April 20, I was worried about it fitting my new bike with the X12 axle so I wrote them to see.
Response was really fast and he gave me a link for the exact one to order. Now we can resume the daily dargis daycare drop off. The fit guide helped get the right axles for us one for my wife, one for me. The axles are robust and well designed to fit a range of lengths, so clever.
Kiddo loved Bar Harbor carriage trails. The axle fit perfectly and arrived super fast! Thanks for making this my family is very appreciative! This is a perfect solution for what seemed to be an unsolvable problem; even my LBS told me there was no way to attach a trailer to my bike.
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
The axle is really well made and exceptionally engineered. Rated 5 out of 5 Tiffany verified owner — June 20, My local bike shop recommended this part and it works as advertised. Would love to see your product at bike expos and local bike events — quality axel and user friendly website. Know not case in all but this is great that the boost to non-boost spacer is included.
Made our day and little one loves it! Rated 5 out of 5 Mike verified owner — September 1, Very pleasantly surprised how seamlessly this worked with my bike. I had a difficult time finding a thru axle for my mountain bike.
But this one slipped right in and my little boy and I were on our way in no time. Very happy with the purchase. Rated 5 out of 5 Paul verified owner — September 6, Product far better than described and service is just simply first class! Easy to fit and once on its super easy to remove and use the original when not towing.
Rated 5 out of 5 pukki81 — September 25, Using this on my Canyon Spectral al 7ex with great results. Seems actually better than the stock axle that came with my bike. I can just leave it on the bike and use the kids trailer hitch when needed Rated 5 out of 5 Ed verified owner — December 5, The 12mm thru axle works perfectly on my Stumpjumper. It allows me to pull a Burley cargo trailer with no problems!
Once one bolt is started, it'll hold itself up so you can get the rest of your hardware installed.The Perfect Daughter - Trailer
And then tighten down your hardware with a 19 millimeter socket. And then tork all of your hardware into the specifications in your instructions. And then do that for the remaining bolts on the other side. Now, if you did lower your exhaust down for that extra clearance, don't forget to put it back up. You'll wanna do that now.
And that completes our installation of the draw tight class and quarter inch trailer hitch receiver on our Nissan Rogue. This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. My experiences have been nothing but positive!
Installation was a breeze, but watch the video first!!! Needed a hitch on a new vehicle.
12mm Thru Axle for Kid Trailer - The Robert Axle Project
I got the hitch from etrailer in a few days. It worked out great. The hitch went on easy. The wiring was a little difficult because I had to lay on the garage floor to do the power line. If you have any mechanical ability and watch the videos there is no reason to go anyplace else for a hitch.
Good quality and perfect fit. Be patient and you will be happy and with out a "Hitch. It may be difficult with out the video. When ever you do something for the first time it is wize to get some help. Unlike what is shown in the video, it was not necessary to drop the muffler down to install the hitch.
I did have to remove the two plastic covers near the rear wheels to access the screws. That is a piece of cake.
The only hard part, as others have said, is that in order to get the hitch to fit flush, there is a little piece of metal on the underneath of the car, right under the center, that I had to bend up and out of the way to get the hitch to fit flush. I did this with a long adjustable wrench; its not too hard to bend this piece.
Other than that, I had to cut a large notch in the plastic piece that I removed from the drivers side before I could put it back because part of this interferes with the hitch once it is in place. Other than that, installation is pretty straightforward with the 5 screws and washers supplied. You can easily install this yourself. You don' even need to jack the car up; there is plenty of room to work under the car on your back. The on-line help videos were excellent.
I ran into a slight problem during installation due to the sheet-metal plate behind the rear bumper cover on my Nissan Rouge. At first I thought I was a problem with this product. I was able to push the metal bumper plate outboard a bit therefore allowing the hitch to seat properly.
Installation was a breeze. I was also able to re-install the rear passenger appearance panel and make a slight modification to the driver side panel that was required to be removed for installation.